• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Protect Your Pride And Joy With The Ghost Immobiliser

Protect your pride & joy from theft by using the Ghost Immobiliser. It's discreet and does not require additional key fobs in order to operate.

The device makes use of buttons on your vehicle (steering wheels, door panels and centre console) to create a unique pin code sequence that can be changed up to 20 times. This will allow your vehicle to begin.

Simple PIN Code Change Process

With the rising rate of vehicle theft, a lot of owners are seeking to improve their security. There are many different types of security gadgets that are sold aftermarket including tracking systems, alarms and immobilisers. However, not all cost of ghost immobiliser them are equally effective in protecting your vehicle. While a tracking device can assist you in locating your car in the event of theft, it does not stop the crime from occurring in the first instance. Immobilisers, on the contrary, do exactly what they say on the tin: they shut down the motor of your car to prevent it from being started. The Autowatch Ghost is one of the most sophisticated options available, making it nearly impossible for thieves to steal your vehicle.

The ghost device utilizes the buttons on your car to create an unique sequence that needs to be entered in order for the engine to start. This can be accomplished by using the window, heater or indicator stalk buttons. In addition it is possible to use an app for mobile devices that acts as an emergency PIN code override and allows the driver to operate the car without the button sequence. This is a great solution if you want to give your car to valet parking or maintenance. The immobiliser will remain active.

The Ghost is a unique and innovative device that works in conjunction with the buttons of your car rather than being a standalone device. This means that it's not just a highly effective security measure against theft from your vehicle but can also be transferred over to any future cars you may have, making it more investment-wise than a traditional steering wheel lock.

Small device that is weatherproof

The Autowatch Ghost Immobiliser is a high-tech security device that shields your car from key cloning and hacking. It also stops ECU swapping. It is a small weatherproof device that communicates with the ECU of your vehicle directly over the CAN bus, causing it to shut down the motor. It can be installed in the vehicle without the need for extra wiring and has been thoroughly tested to ensure that it is compatible with all vehicles. It is also resistant to jamming devices that are the most common method used by thieves to get around the immobilisers in place.

The advantage of using CAN data is that it runs silently when compared to conventional systems. It can't be detected by sophisticated RF scanning or code-grabbing technology and is likewise unreadable by traditional diagnostic tools. The Autowatch ghost does not produce LED indicators and Install instead uses the buttons inside your vehicle, such as the steering wheel or centre console panels to create a unique, customizable disarm sequence. You can create a sequence that is up to 20 presses long for added security. The iPhone app allows one, authorized connection using a pairing code that is unique to the Ghost and the communication between the two devices is encrypted.

The ghost 11 immobiliser stops car thieves from adding an ignition key that is not in use or replacing the ECU to bypass the immobiliser. It will only allow the engine to run only if the correct pin code is entered. It is also possible to put it into Valet/Service mode for temporary operation (with set parameters such as 30mph speed limit) to allow you to give your car to a valet service for servicing without the need to enter a pin code.

Each vehicle is tested

The Autowatch Ghost is the first aftermarket immobiliser for CAN bus that connects to the wiring of your vehicle and connects to your engine control unit (ECU). The device snoops on electronic signals that block the system of your vehicle from running its normal initialization process until you enter a custom passcode. The system can be activated or deactivated through your smartphone's application without the need for additional wires.

The factory-installed immobilisers function with a transponder which is embedded in the key. This sends a message to the ECU. If the correct code is sent the car will begin however, if the transponder is replaced by one from a different vehicle, the immobiliser cannot recognize it. This allows the vehicle be stolen and then started. The ghost 2 immobiliser installation near me immobiliser has been developed by a South African company at the top of security systems for vehicles technology. It guards you against hacking or key cloning, and even key theft. Only by physically towing your car away from thieves could they take it away and not be able to drive it.

Ghost makes use of buttons on your vehicle, such as the indicator stalk, steering wheel, and door panels, to generate an individual PIN code which must be entered in order to use your car. This is not required to use additional hardware like key fobs and can be up to 20 presses long. It is also unrecognizable to diagnostics equipment and doesn't transmit radio frequency signals, which means thieves are not able to make use of sophisticated RF scanning or code grabbing technology to discover that a security system has been installed.

Ghost is more difficult to get rid of than car alarms that require disarming with several buttons. This makes it a perfect supplement to a GPS tracker, which can help locate your car after it has been stolen.

Emergency PIN code override

You don't have to look far on social media to find stories or videos about cars that were stolen using the most advanced technology tools. This includes key-cloning devices as well as hacking tools that allow thieves to start the car without your original keys.

Our Ghost immobiliser fights this and gives you an additional layer of protection to stop your vehicle from being stolen when it is targeted by thieves. It works by creating an individual pin code push sequence from your buttons on the steering wheel, door panel and the center console. The unique pin code must be entered along with your original key fob in order to prevent the vehicle from beginning. The unique override pin can be found on the black card you will receive following your installation. It is simple to remember as there aren't any LEDs.

The device is hidden within the vehicle's wires and does not emit radio signals, therefore it cannot be detected by modern criminals using diagnostic software that is able to detect the type of security system you have installed. This makes it a great alternative to an electronic device for tracking.

Contrary to other security systems which use a relay in engine bays, CANBUS immobilisers communicate via CAN databus (brand dependent) with the ECU and BCM of the vehicle. This enables them to shut down the vehicle completely by sending the use of a digital block of commands for both the ECU and the engine.

It is also possible to connect a separate analogue immobiliser, alarm or tracker to these systems but this must be specified before installing the device. They are also fully service/valet mode compatible and a good alternative to a tracker if you are you have your car checked for an electrical fault at the dealers.

Service/Valet mode

In recent years, there has seen an increase in the number of cars being stolen with the owners' keys. It is easier than ever to steal your pride and joy thanks to the availability of key cloning devices and door lock picks. We have created the Autowatch Ghost Immobiliser to combat this. It stops your car from being driven, even if you keys have been cloned.

It communicates directly with your car's ECU (Engine Control Unit), via the CAN data loop. It's completely silent as it doesn't use radio frequency or key fobs. It isn't detected by diagnostics or any other hacking device. It also prevents the addition of the key to a new one or replacing the ECU to bypass the system, since only the correct PIN code can allow the engine to start.

The device is hidden in your car and is accessible via buttons on your steering wheel, centre console and door panels. Before you can begin your car, you must enter a unique and reversible PIN code that can be as long as 20 numbers.

This is the first aftermarket immobiliser for CAN bus to be designed to stop your car being started or driven away if a PIN code isn't entered first. If you're driving away with the device arming, an indicator will appear on your dashboard that will flash continuously for around 300m. Entering your PIN code will deactivate the anti-hijack. Your vehicle will continue to operate just as normal. If you do not enter your PIN at this point, the warning will continue to flash and require a new PIN code for every attempt to start your car.