• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Add Warmth to Your Home With a Fireplace Wall Mount

A fireplace wall mount can add warmth and ambiance to any room, whether it's in your home, office or commercial space. These units are generally easy to set up and include mounting brackets to hang or recessing into a wall.

Follow the directions on the manufacturer's site for a quick and easy installation. Verify that the wall-mounting bracket and the bottom of the fireplace go together, then fix it to the wall.

Size

A wall-mounted electric fireplace can be a focal point within a room that creates warmth and ambiance. They come in a range of sizes that will fit all spaces. A smaller model would be ideal for a bedroom, while a larger unit could be used in a family room or living room. Some models offer an option to install recessed units against the wall to create an aesthetically pleasing look.

The height of a fireplace wall mount will also determine the way it appears in the room. For dramatic effects most people prefer to place them higher on the wall, generally 6 to 12 inches off the ground. Some prefer to place the TVs at a normal height of 4.5-5 feet. This lets them be seen by most people sitting in the room.

Whatever size you decide to go with it is crucial to remember certain factors to ensure your fireplace is secure and efficient. For instance, you need to ensure that all combustible items are kept at a minimum of three feet away from the fire including furniture and drapes. If possible, also fix the brackets for mounting to studs. If you cannot find studs you can use plastic anchors. This will ensure that the fireplace will not be pulled away.

When selecting a fireplace mount, it is important to take into consideration the amount of heat it produces. A common rule of thumb is to select a model that produces about the same amount of heat as an typical electric heater for your home. This will ensure that your fireplace will provide enough heat to the entire room.

Some fireplaces have specific features that make them stand out from competitors. For instance, some fireplaces come with remote control with adjustable brightness settings and no-heat settings. They also have cool-to-the-touch glass and realistic-looking LED flames. Other noteworthy features include a built-in shelf to hold electronic devices as well as an easy, no-professional-help installation process.

Installation

Contrary to a built-in electric fire that requires a hard-wired connection to the electrical system in your home, a fireplace insert wall mount is semi-permanent. It can be mounted directly on the wall or into a bracket which is then attached to the wall. It is essential to choose a location close enough to an outlet that it will allow the power cord reach it, while providing enough clearance from nearby objects. This is in line with the manufacturer's recommendations in the owner's manual.

Plug it in and test the LED lights and settings prior biofireplace to when you begin the installation. This will let you know whether it is ready for installation or if it has to be tested further.

Next, prepare the area where you intend to install the fireplace wall mount. Based on the model you purchase, this might involve installing a bump out on the wall or covering the wall with drywall. In the second case, use proper drywall methods such as tapeing and mudding. Let it completely dry before continuing.

After the walls have been prepared and the brackets are attached to the wall using screws. It is recommended that they be placed into the studs that are behind the drywall. This will stop the fireplace from slipping away from the wall in the future.

When the bracket is secured, it is time to mount the fireplace itself. The way to mount the fireplace varies from model to model but generally, there is a ledge on which the fireplace can rest, and a place to attach it to the brackets at the top. You can then add any additional media like logs or embers.

Some models let you attach the firebox and the screen together on the wall bracket. This makes installation a lot easier, but it is important to ensure that everything is fitted correctly and is tight before closing.

After the fireplace has been installed, you can complete the look by either screwing the bracket on the wall and trimming the excess wires. You can also consider using paintable wire covers to hide the power cord, if you want.

Safety

A fireplace wall mount is a convenient method of heating your home without occupying floor space. It is important to use safety precautions with this type of fireplace. The first step is to ensure that the unit is grounded to avoid electric shock. Make sure you read the instructions given by the manufacturer for proper usage.

It is possible to buy wall-mounted electric fireplaces that do not generate heat, but most of them include a heater to enhance the realism of the flame effects. It's usually a fan-forced heating element that blows air over the heating element. Certain models also feature an infrared heating source.

After the fireplace is mounted, it is important to avoid touching the hot surface. This could cause burns or damage the unit. In addition, you should keep all combustible objects at least three feet from the fireplace to minimize the chance of fire. Be careful not to block vents in the back of the unit.

There are other security features to consider when selecting an electric fireplace wall mount. For instance, you must be sure that the device comes with an emergency shut-off feature to prevent overheating and fires. It is also an ideal idea to buy a model with a low temperature output, since this will help save energy.

Another factor to consider is the material that the surround is made of. Choose a material that is safe for pets as well as children such as wood fireplace veneers, steel or glass. It is also recommended to select an item with a display or remote control to make it easier to operate.

There are a variety of electric and ethanol varieties of wall-mounted fireplaces. The best fireplace for you will depend on your budget and home's style. You can be certain to bring warmth and class in your home, whether you choose an electric or ethanol fireplace. However, you should always adhere to the safety guidelines of the manufacturer and remember to keep your family, pets and friends safe while using this fireplace.

Style

The design of the fireplace wall mount will determine how it looks on your walls. Some models are designed to stand out, while others blend into the décor of the room. A contemporary model like the Streamlined electric firesuite wall fireplace, features a sleek, modern front with a minimalist design. It has top venting that allows heated air to circulate seamlessly while preserving the fireplace's sleek design. Its flat mount as well as the easy-to-use remote make it easy to operate.

There are also wall-mounted electric fireplaces with mantels with a more traditional design. These units are ideal for homes with existing open hearths or those looking to convert a wood-burning firebox into an electric fireplace that does not have a chimney. Flat-wall fire places are available in a variety of sizes and include shelves to display your decorations. They're a great option for living rooms, bedrooms, and even for home offices.

A gas wall-mount fireplace is another excellent option for those looking to add a warm, inviting vibe to their space. They come with the traditional log set and are available in different frame styles that include black and natural stone. They also come with an ember bed that is customizable and LED flame color options for personalization. Certain models have a TV mount that is built-in to provide additional functionality.

Certain models are designed to be installed directly onto the wall while others can be recessed or completely into the wall. The Allusion wall-mount fireplace has a small footprint which permits it to be recessed into 2x6 frame walls. You can, however, add a trim skirt to the exposed portion. The Allusion comes with a convenient remote and multiple temperature settings, so you can enjoy the fireplace all year long.

Surface-mounted electric fires typically project between 4 and 6 inches into the room. They are therefore easier to install than models that are built into the wall cavity or recessed into a wall. Renters will also be pleased with the ease of installation as they don't have to be concerned about drilling holes into their walls. When you move, you'll be in a position to easily move or relocate your fireplace.